Fresh Water Cooling Kits

Product No. - CFWK_01_264
MMI Fresh water cooling kit This kit requires approximately 2" clearance in front of the flywheel cover to accommodate the "V" belt drive of the sea water pump. The sea water pump is designed to use the same impeller as the Oberdorfer model 202M which is in widespread use on Atomic 4 engines. The heat exchanger is bulkhead-mounted and can be located in any convenient location.
Price - $685.00	Add this Item

Product No. - CFWK_02.1_501
Sea water pump only - MMI 501 pedestal pump This pump is used in our fresh water cooling kit and (through the use of a removable base) can be used to replace a Sherwood model SH R-30-G, a Jabsco series 1673 or an Oberdorfer 201M. The main body of the pump is the same as the MMI flexible impeller (flange) pump, and it uses the same impeller as the MMI and Oberdorfer flange pumps. The inlet and outlet of this pump are 3/8" female pipe threads and face upward, which is usually more convenient in Atomic 4 installations than side-mounted inlets and outlets. Please note, however, that if the pump you are replacing has inlets and outlets in some other direction, you may not be able to use the same fittings with this pump.
Price - $275.00	Add this Item

Product No. - CFWK_03_266
Sea water pump only - Oberdorfer model 201M
Price - $306.00	Add this Item

Product No. - CFWK_04_267
Sea water pump kit - with MMI 501 pedestal pump, bracket, pulley and belt
Price - $315.00	Add this Item