1. We removed our Atomic-4 2 years ago and had it rebuilt and tried to install it last week and once we got the motor in we found that we were 2in. out of alignment withe the prop shaft? the motor is setting to high. we had the rubber mounts installed even after removing them we are still too high.

It sounds as though you have an early model rail-mounted engine. The adjustable mounts really won't work in these installations, as they were designed for rails that are approximately 2" lower than yours.

I'm not all sure why your engine wouldn't line up after you lowered it back down to the original rails. This would presumably be the same level the engine was sitting prior to removal. - Updated: May 24, 2004