Mando 51A to isolator

[Unregistered]

I want to install a battery isolator in the charging circuit. The Mando has a sensor terminal that is looped from the main output terminal. What is the correct way to wire the isolator with regard to the sensor loop?

Duane

[Don Moyer]

Duane,

I know of no special connections for an isolator on the Mando 55 amp alternator. It is a single output, internally regulated alternator. To insure that your isolator is connected correctly, I would follow the instructions that come with the isolator. If the instructions are incomplete, I recommend contacting the manufacturer.

Regards,

Don Moyer