PDA

View Full Version : Changing the reverse brake pad adjusting bolt

Fretlessiv
08-20-2010, 06:41 AM
The extremity pin (roller) just quit. Is it possible to change the bolt without removing the engine from the boat?
Al Schober
08-20-2010, 08:42 PM
Yes. Do a search on 'Kaminsky Modification'. Involves drilling a hole in the side of the transmission case. We all thank Rich for this stroke of genius.

Al
rigspelt
08-21-2010, 04:54 AM
Yes. Do a search on 'Kaminsky Modification'. Involves drilling a hole in the side of the transmission case. We all thank Rich for this stroke of genius.Al
The modification is described here:
http://www.moyermarine.com/kaminsky.htm