Thank you Don.

[domenic]

Don, thank you for the Sept 2011 news letter. These go into my MM Service Manual.
I know you are stuck in a time slot keeping up with building parts...do you think maybe you can start a new section: "A 4 tips of the week."?

Domenic

[Maurice]

Tip would be a good thing.

Ever have the plug wire stick onto the plugs so hard that you need to yank / pry them off. Use silicone lubricant....the stuff used for greasing brake caliper sliders. Can be picked up at NAPA or where you buy brake parts.

Put some around the plug and a bit on the inside of the wire's boot. Push it on and next time they'll come off easily. Doesn't affect the firing and it can withstand the heat.

That little tip came from a mechanic friend of mine....and it works.

[domenic]

Maurice...that goes into my tip book. Thank you.