Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Good Guys

Reply
 
Thread Tools Display Modes
  #1   IP: 74.116.173.2
Old 12-13-2016, 08:34 PM
SRuiter SRuiter is offline
New Member
 
Join Date: Sep 2012
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Looking for A4 Mechanic in Everett WA (Seattle to Anacortes)

I have an A4 with a fuel pump that needs repair/rebuild in Everett WA. The project seems beyond my capabilities, but after talking to Ken at Moyer Marine, this is a very fixable engine.

The sediment bowl failed, see picture 4 (if I can figure out how to attach one). Perhaps just that needs replacing.

Thanks!

Steve
Attached Images
 
Reply With Quote
  #2   IP: 138.207.172.243
Old 12-14-2016, 09:34 AM
TomG's Avatar
TomG TomG is offline
Afourian MVP
 
Join Date: Nov 2010
Location: Kent Island, MD
Posts: 598
Thanks: 37
Thanked 46 Times in 24 Posts
Steve,

I know you were asking about a mechanic, but if you found your way to this forum, I am pretty sure you could easily rebuild your fuel pump. Short of having a very serious internal problem (spun bearing, broken valve, cracked block) most repairs to an A-4 are doable by a handy person with normal tools. That's one of the beautiful characteristics of this engine.

Here's a sediment bowl from our sponsor.

Sediment bowl from MMI

Here's a rebuild kit as well.

Rebuild kit for mechanical fuel pump

There really isn't anything cosmic about the fuel pump. If you found your way to this forum, I'm sure you could rebuild it yourself if you were so inclined. As to your original post, I do not know of any mechanics in the Seattle area, but we have several members of this forum who might. Good luck!
__________________
Tom
"Patina"
1977 Tartan 30
Repowered with MMI A-4 2008
Reply With Quote
  #3   IP: 47.33.99.96
Old 12-14-2016, 02:31 PM
HalcyonS's Avatar
HalcyonS HalcyonS is offline
 
Join Date: Dec 2012
Location: LA
Posts: 486
Thanks: 29
Thanked 7 Times in 7 Posts
Agree with Tom, as most will here
you could also swap out for an electric pump.
A bit of fiddling with wires and hose clamps, no big deal.
Get an oil pressure switch tho.
__________________
"Halcyon" 36' custom sloop. 8 tons. Glass over strip plank mahoghany. Spruce mast and booms, launched 1969. Original A4.
Reply With Quote
  #4   IP: 137.200.32.38
Old 12-14-2016, 03:15 PM
joe_db's Avatar
joe_db joe_db is online now
 
Join Date: May 2009
Posts: 2,783
Thanks: 17
Thanked 207 Times in 158 Posts
Moyer sells all the parts or an entire new pump. If it is old maybe just get a rebuild pump and call it a day.
Reply With Quote
  #5   IP: 70.199.150.141
Old 12-14-2016, 03:41 PM
wristwister's Avatar
wristwister wristwister is offline
Senior Member
 
Join Date: Nov 2013
Location: Arlington, WA
Posts: 51
Thanks: 0
Thanked 2 Times in 2 Posts
I'll 2nd (3rd? 4th?) what others are saying. It's been said that if these engines were any simpler, they couldn't possibly run. And in the words of Captain Ron "if it's going to break, it will break out there". Fix this fuel issue yourself, and when the next fuel issue occurs while your drifting toward the rocks in gale winds, you'll know your system and be able to fix it.

And I'll also 2nd the idea of going to an electric pump. Not too tough, but do it right with the oil pressure safety switch. I believe all the doodads for doing this are available here. Hey, while your fingernails are dirty, might as well throw electronic ignition under that distributor cap too!

I'm certainly no mechanic, but I've kept my old A4 running for a few years and I've learned a thing or two, and I'm in the Everett area. Once you decide how you want to tackle the fuel pump issue perhaps I could give you a hand. PM me.
__________________
"A ship in the harbor is safe ... but that's not what ships are built for.
Reply With Quote
  #6   IP: 98.209.31.214
Old 12-14-2016, 07:31 PM
marthur's Avatar
marthur marthur is offline
Afourian MVP
 
Join Date: Dec 2004
Location: Grand Rapids, Michigan
Posts: 818
Thanks: 24
Thanked 19 Times in 18 Posts
And here's a thought, I have a fully functional, already rebuilt mechanical fuel pump in my spares kit and I am about to put it all up for sale. I would happily ship it to you for the cost of the rebuild kit--which is less than an hour of marine mechanic's time. Just PM me.

Then, you could tackle the rebuild at your leisure. That first repair is a huge confidence booster. It is also addictive, so beware.
__________________
Mike

Last edited by marthur; 12-15-2016 at 07:38 AM.
Reply With Quote
  #7   IP: 50.34.110.80
Old 12-15-2016, 09:47 AM
capnward's Avatar
capnward capnward is offline
Senior Member
 
Join Date: Aug 2012
Location: Deer Harbor WA
Posts: 135
Thanks: 4
Thanked 23 Times in 19 Posts
I like my mechanical pump; it has been good for 2000 hours, since the rebuild by Gallery Marine in Seattle. I say get a rebuilt pump and put it on. Become a student of your engine and work on it and you will develop new capabilities. The Moyer manual is a must.
Use MMO in the fuel, especially if you can't get non-ethanol, and the diaphragm will not dry out and crack. In my opinion.
Reply With Quote
  #8   IP: 98.226.209.168
Old 12-16-2016, 02:31 PM
HOTFLASH HOTFLASH is offline
Senior Member
 
Join Date: Oct 2004
Location: Chicago
Posts: 197
Thanks: 23
Thanked 19 Times in 14 Posts
If I can do the rebuild successfully, anyone can. Good Luck!
Reply With Quote
  #9   IP: 74.116.173.2
Old 12-27-2016, 02:02 PM
SRuiter2016 SRuiter2016 is offline
New Member
 
Join Date: Dec 2016
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
thanks for the help

Wow guys, thanks for the encouragement. I think I will buy a new pump assembly and see if I can get it on myself.
Reply With Quote
  #10   IP: 50.132.111.15
Old 12-30-2016, 03:06 PM
anian anian is offline
Senior Member
 
Join Date: Dec 2007
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
If all else fails call Pat @ Pat's Marine Engines in Seattle. He is arguably the A-4 go-to guy in the Puget Sound area and has been repairing/rebuilding A-4s for at least 25 and probably more years.
Reply With Quote
  #11   IP: 71.178.90.55
Old 12-30-2016, 06:42 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 6,309
Thanks: 388
Thanked 240 Times in 185 Posts
Thumbs up

SRuiter, anian's suggestion is a good one. We all love pimping Moyer Marine because sales help to keep the company and forum alive, however, sometimes a local supplier makes more economical sense for some things, especially "smalls" (smaller items), and also helps keep your local supplier in business too!

My local supplier is Zahniser's in Solomons, MD. They have a mechanic on the Moyer Good Guys list, Billy...he must be the equivalent to your Puget Sound guy. I buy impellers, gaskets and small stuff from them since they are a 5 minute drive. My "annual" list that I build up (rebuild kits, etc.) I pick up from Moyer when it all makes sense with shipping.

I am also a fan of the mechanical pump. I have rebuilt two now, and have one as a spare. I think I have at least two more in storage, I am hording them!
__________________
-Shawn
"Twice Around" - '77 Catalina 30, #511 with original A-4 & MMI manifold.
Great fall sailing!!

http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif

Last edited by sastanley; 12-30-2016 at 06:45 PM.
Reply With Quote
  #12   IP: 47.208.132.55
Old 01-01-2017, 04:07 PM
Humboldtsailor Humboldtsailor is offline
Senior Member
 
Join Date: Oct 2016
Posts: 13
Thanks: 1
Thanked 1 Time in 1 Post
i would recommend upgrading the upper housing as well the quality is top notch.
http://www.moyermarine.com/cgi-bin/s...=FPMP_12.1_356
Reply With Quote
  #13   IP: 112.200.105.18
Old 11-22-2017, 03:25 AM
Marineee Marineee is offline
Frequent Contributor
 
Join Date: Nov 2017
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
did you manage to solve this issue? any updates?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A4 ready to ship from Seattle today! winterhawk For Sale - Engines and Engine Parts 0 12-14-2012 11:52 AM
Looking 4 a Good A4 Mechanic in RI! Pearson1975 Good Guys 0 02-15-2011 11:04 AM
I am looking for the best mechanic in Seattle. kwilson1033 Good Guys 2 03-02-2010 04:16 PM
Atomic 4, mechanic, near Fairfield Conn, USA JasperWindvane Good Guys 2 11-09-2009 04:59 PM
mechanic near seattle markromero Good Guys 2 09-09-2008 12:42 PM


All times are GMT -5. The time now is 04:06 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2017 Moyer Marine Inc.

All Rights Reserved