Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Owner Discussion Groups > Discussion Groups > Alberg

Reply
 
Thread Tools Display Modes
  #51   IP: 192.186.122.174
Old 11-20-2017, 09:01 AM
GregH's Avatar
GregH GregH is offline
Senior Member
 
Join Date: Jun 2015
Location: Kingston, ON
Posts: 183
Thanks: 73
Thanked 5 Times in 4 Posts
Quote:
Originally Posted by lat 64 View Post
Looking good.
I would make the screws that hold the strap brackets through bolts with those nice big washers you have on the other side. Half-inch wood screws in old wet plywood can pull out in a big bump. Design for extra bad things to happen.

Winter projects going on here too. Be happy in your work,
Russ
Nice sketch! just whipped that off did you? And I very much appreciate everyone's input making sure I have it right

The pic is deceiving, your sketch is exactly how the padeyes are attached - #10 bolts, fender washers, nylocs
Reply With Quote
  #52   IP: 100.36.89.105
Old 11-20-2017, 10:30 AM
edwardc's Avatar
edwardc edwardc is offline
Afourian MVP
 
Join Date: Aug 2009
Location: Laurel, MD
Posts: 1,963
Thanks: 30
Thanked 155 Times in 112 Posts
Quote:
Originally Posted by sastanley View Post
Greg, that all looks great. I do wonder about corrosion of the metal parts of the straps. No real basis, just a wonder..maybe we can slather it with petro jelly or some anti sieze or something. On the other hand, maybe you want it to sieze up so it never gives way!
+1 on that. Unless those strap tensioners are bronze or stainless, they're likely going to rust into a solid piece.
__________________
@(^.^)@ Ed
1977 Pearson P-323 "Dolce Vita"
with rebuilt Atomic-4

Reply With Quote
  #53   IP: 192.186.122.174
Old 11-20-2017, 12:02 PM
GregH's Avatar
GregH GregH is offline
Senior Member
 
Join Date: Jun 2015
Location: Kingston, ON
Posts: 183
Thanks: 73
Thanked 5 Times in 4 Posts
Quote:
Originally Posted by edwardc View Post
+1 on that. Unless those strap tensioners are bronze or stainless, they're likely going to rust into a solid piece.
Good plan-will have to do something. I am only in fresh water (Great Lakes) so that will also help.
Reply With Quote
  #54   IP: 12.219.49.130
Old 11-21-2017, 10:50 AM
marthur's Avatar
marthur marthur is online now
Afourian MVP
 
Join Date: Dec 2004
Location: Grand Rapids, Michigan
Posts: 818
Thanks: 24
Thanked 19 Times in 18 Posts
Another thought on the strap, if you want to avoid corrosion issues: I have successfully used high strength zip ties to secure tanks in my boat and camper. I usually keep some on hand with a breaking strength of 400 lbs or so and long enough to handle a small fuel tank. They don't rust, are easy to apply and are inexpensive. If you have to remove the tank, cut the tie and replace.

You can find them all over, but I sometimes get them from an industrial supply house because they publish the breaking strength: McMaster Carr Zip Tie Catalog Page
__________________
Mike
Reply With Quote
The Following User Says Thank You to marthur For This Useful Post:
sastanley (11-22-2017)
  #55   IP: 137.200.32.6
Old 11-21-2017, 02:18 PM
joe_db's Avatar
joe_db joe_db is offline
 
Join Date: May 2009
Posts: 2,785
Thanks: 17
Thanked 207 Times in 158 Posts
Spray the strap tensioners with Boeshield or similar
Reply With Quote
The Following User Says Thank You to joe_db For This Useful Post:
sastanley (11-22-2017)
  #56   IP: 72.194.217.50
Old 11-22-2017, 01:07 AM
JOHN COOKSON JOHN COOKSON is offline
Afourian MVP
 
Join Date: Nov 2008
Posts: 2,775
Thanks: 27
Thanked 366 Times in 290 Posts
Quote:
Originally Posted by marthur View Post
Another thought on the strap, if you want to avoid corrosion issues: I have successfully used high strength zip ties to secure tanks in my boat and camper. I usually keep some on hand with a breaking strength of 400 lbs or so and long enough to handle a small fuel tank. They don't rust, are easy to apply and are inexpensive. If you have to remove the tank, cut the tie and replace.
]
I use the same thing to hold down my battery boxes. Never a problem.

TRUE GRIT
Reply With Quote
  #57   IP: 66.102.86.61
Old 11-28-2017, 07:46 PM
GregH's Avatar
GregH GregH is offline
Senior Member
 
Join Date: Jun 2015
Location: Kingston, ON
Posts: 183
Thanks: 73
Thanked 5 Times in 4 Posts
All set for install in the boat. Supposed to be nice-ish this coming Sat and about 3C. We'll see how far we get !


Name:  IMG_20171128_22519.jpg
Views: 94
Size:  36.8 KB
Reply With Quote
  #58   IP: 66.102.86.61
Old 12-02-2017, 05:19 PM
GregH's Avatar
GregH GregH is offline
Senior Member
 
Join Date: Jun 2015
Location: Kingston, ON
Posts: 183
Thanks: 73
Thanked 5 Times in 4 Posts
Took advantage of some nice +5C weather and got the tank installed. Hoses I'll do in spring. The fuel on/off valve is simply sitting on top to remind me to find a better position for it in spring.

Name:  IMG_20171202_54779.jpg
Views: 67
Size:  37.0 KB
Bolted down and secure. (Please don't judge me by the mess in the bottom! )

Name:  IMG_20171202_55413.jpg
Views: 66
Size:  32.1 KB
All lashed down and ready for hoses in spring.

Name:  IMG_20171202_55110.jpg
Views: 67
Size:  28.8 KB
The access cut out from galley so tank could slide in. Will make a nice removable insert for it and fresh paint. It's only one more job on the refit list.
Reply With Quote
  #59   IP: 12.155.149.218
Old 12-05-2017, 05:59 PM
HOTFLASH HOTFLASH is online now
Senior Member
 
Join Date: Oct 2004
Location: Chicago
Posts: 197
Thanks: 23
Thanked 19 Times in 14 Posts
Off topic question--actually 3 of them

What kind of gaskets are on your cockpit locker hatch covers? Know where they could be purchased? Aren't you glad you posted pics? I am!

Mary
Reply With Quote
  #60   IP: 66.102.86.61
Old 12-05-2017, 07:58 PM
GregH's Avatar
GregH GregH is offline
Senior Member
 
Join Date: Jun 2015
Location: Kingston, ON
Posts: 183
Thanks: 73
Thanked 5 Times in 4 Posts
Quote:
Originally Posted by HOTFLASH View Post
What kind of gaskets are on your cockpit locker hatch covers? Know where they could be purchased? Aren't you glad you posted pics? I am!

Mary
That's a good question Mary! They were on the boat when I purchased it. I'll have a look this weekend when next I'm there. Memory thinks it's just household weather stripping but we all know how often he's right

Last edited by GregH; 12-06-2017 at 08:40 AM. Reason: spelling
Reply With Quote
  #61   IP: 72.194.216.156
Old 12-05-2017, 08:32 PM
JOHN COOKSON JOHN COOKSON is offline
Afourian MVP
 
Join Date: Nov 2008
Posts: 2,775
Thanks: 27
Thanked 366 Times in 290 Posts
Sure looks like the hatch seals on my boat. There is a piece of rubber molding that goes in the groove and sticks up a bit higher than the groove. My boat was built in 1979 and still has the original rubber moldings. They have worked well and sealed totally. The rubber molding needs to be secured with a bit of silicone glue\sealer so it doesn't lift out of the groove when the hatch is opened..

TRUE GRIT
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Polishing Filter GregH Fuel System 25 11-17-2017 12:19 PM
Engine runs for a couple minutes, stops hard, no fuel flow pdecker Troubleshooting 30 05-28-2015 01:17 PM
Fuel Shutdown Issue gdasw Fuel System 17 06-20-2013 08:53 AM
Experience Cleaning a Dirty Fuel Tank in Place BobA Fuel System 16 09-21-2012 09:02 AM
Fuel tank flush? Fuel deliver problems. SimonP Fuel System 13 10-02-2008 05:22 PM


All times are GMT -5. The time now is 09:28 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2017 Moyer Marine Inc.

All Rights Reserved