Moyer Marine Rebuilding Services

Custom Machining Services:
Call our telephone sales representative (Ken) at 610-421-4436, and let him assist you in selecting from the following list of machine services. If you wish, you can drop your parts off at our machine shop or we will ship you a special shipping container (shuttle) at our expense with a UPS pick up label to accommodate your block, head, manifold, crankshaft, valves, connecting rods and aft housing. You will be charged the shipping costs for your parts to and from our shop. After receiving your machined parts from our shop, you can either keep the shuttle or return it at your expense for a $20.00 credit.

Chemically clean and Magna-Flux block*	$90.00
Cylinders machine honed (each)*	16.00
Cylinders re-bored (each)	26.00
Cylinders sleeved (each)	85.00
Block deck re-surfaced*	65.00
Cam bearings replaced and line bored (including brass bearings)*	140.00
Valve seats re-machined (each)*	8.00
New hardened valve seats installed (each)	21.45
Valves refaced (each)*	4.00
Valve guides replaced (each)*	10.00
Valve tappets resurfaced (all eight)*	25.00
Labor to remove and replace valves	75.00
Reface and pressure test oil regulating valve seat*	45.00
Mill manifold side of block or water jacket opening	50.00
Pressure test block	70.00
Pressure test head or manifold	31.50
Prime and paint block (MMI Atomic 4 bronze)*	25.00
Head or manifold - clean and Magna-Flux*	50.00
Head or manifold - mill gasketed surfaces*	40.00
Head or manifold - prime and paint (MMI Atomic 4 bronze)*	13.00
Crankshaft wet-Magna-Flux and polish*	50.00
Crankshaft reground (main and rods)	100.00
Crankshaft reground (rod journals only)	72.00
Connecting rods reconditioned (all four)*	80.00
Labor to remove and replace idler gear spindle	*No Charge*
Idler gear bushing replaced and spindle machined*	40.00
Clean, paint, and install Kaminski modification in aft housing*	30.00
Retap drain holes in block, head or manifold (each)	5.00
Labor to remove, clean and replace head studs	*45.00*
Remove broken studs or install threaded bushings (each)	15.00
Install freeze-out plugs (each)*	7.00

* Most frequently used options (sample price) $918.00

A deposit of $520 is required when placing your order. Of this total deposit, $20 will be retained as a core charge pending return of the shipping shuttle at the end of the machining work. Full payment is due when your engine parts are completed and ready for return shipment, unless prior arrangements have been made.

Call us at 610-421-4436 to confirm prices and place your order.